Contents
(
1
,
2
)
1.
Nomenclature of front panel
2.
Nomenclature of rear panel
3.
Operation and Function
1.
Basic Operation
2.
Preset
3.
Preset Recall
4.
Display Zero
5.
Add
6.
Subtraction
7.
1/2 (Half) Divide
8.
MM / INCH Conversion
9.
ABS / INCR Conversion
(1) Inputting ABS Position and ABS Numeral
(2) Confirmaiton of ABS positioning
(3) Example of ABS input
(4) Example of confirmation of ABS input
(5) Example of positioning of Sub-Datum point from Datum point
(6) Exmaple of confirmaiton of Sub-Datum point from Datum point
10.
Function Key
(1) Display zero
(2) Memory in/out
(3) Memory clear
(4) Radius/Diameter conversion
(5) Circle divide and circle parameter change(Bolt hole circle)
(1) in case of setting to X,Y axis
(2) In case of setting to X,Z axis
(3) In case of setting to Y,Z axis
(4) In case of changing to Dia/Rad
(5) Bolt hole circle(Circle divide)
6) Axis direction change
7) Rate
8. Display check
11.
Reference Key
(1) Memorizing reference point
(2) Order of finding ref. point
(3) Find reference point
12.
Resolution comversion
4. EDM
(1)
Basic operation
(2)
Output
(3)
How to input, an example
5.
Trouble shooting
6
Exchanging Fuses
7
Drawings of connection and pins assignments.
8.
Certificate of Warranty